Vibration Exciter
APS Dynamics Inc. designs and manufactures mainly Long Stroke Vibration Exciters for the low frequency range. The ELECTRO-SEIS® shakers are available in two different configurations – ball bearing type shakers and air bearing type shakers.
Ball Bearing
The ball bearing shakers are used primarily for modal test excitation or environmental test applications in the low frequency range < 200 Hz. Although these shakers have a long stroke (158 mm) they are still portable. Thus APS ELECTRO-SEIS® shaker are ideal tools for testing of bridges, buildings or other objects outside a laboratory.
Air Bearing
For sensor calibration applications or testing applications that require a smooth motion of the exciter, the APS Shakers feature air bearing armature guidance for exceptionally clean waveforms with wide dynamic range and very low cross-axis motion.
APS 113
APS 113
Ball-bearing ELECTRO-SEIS® Long-Stroke vibration exciter specifically designed to be used alone or in arrays for modal excitation of complex structures, particularly when low frequencies are required. Different operating modes with reaction masses, fixing points or auxiliary table kits multiply the application possibilities.
chevron_right
APS 400
APS 400
ELECTRO-SEIS® Long-Stroke vibration exciter with 445 N max. force that is suitable for excitation of large structures such as ceilings or bridges.
chevron_right
APS 420
APS 420
The strongest ELECTRO-SEIS® Long-Stroke vibration exciter to date is used for vibration tests of airplanes and other large structures. With a maximum force of 900 N and up to 150 mm stroke the shaker unlocks a new performance level.
chevron_right
APS 4001
APS 4001
The APS 4001 - Horizontal Reaction Mass System provides a means of extending the rated force output for the APS 400 Shaker to frequencies as low as 0.5 Hz.
chevron_right